2000 Jeep Wrangler Cruise Information
|
Constant 12V+
|
Pink/Blue or Red
|
Ignition Harness or Fuse Panel under Hood or Use Hot
Side of Brake
|
Switched 12V+
|
Blue
|
Ignition Switch Harness
|
Ground
|
Use Chassis
|
Near Cruise Control Module
|
Hot Side of Brake
|
n/a
|
Brake Switch or White at Hazard Switch
|
Cold Side of Brake
|
White/Tan
|
Brake Switch or White at Hazard Switch
|
Tach
|
Gray/White
|
Or Gray (-) At Coil
|
VSS Lead
|
White/Orange
|
Wire Harness from Transmission
|
Pulses Per Mile
|
8000 PPM
|
Notes: Vehicles with Manual Transmission require Clutch
Switch. Some vehicles may require a speed signal generator and/or
other parts/adapters not listed above. Rostra® Cruise module switch
settings may differ if you use a speed signal generator or magnets and a
pick up coil.
|